keepalived+nginx-创新互联

我们先来谈谈keepalived的工作原理：

keepalived的工作原理基于三个层面，分别时IP层，TCP层和应用层
IP 层：keepalived会定期向服务器集群中的服务器发送一个类似于ping程序的ICMP数据包。通俗理解就是我keepalived来ping你服务器，我要是ping通了，那我知道你还活着，咱们可以继续合作，如果不幸发现你挂了，那就得把这台服务器踢了。该层就是确保服务器ip地址有效，一次来判断这台服务器可否继续在岗谋职。
TCP层：这一层和IP层类似，只不过IP层检查的是IP，该层检查TCP端口。keepalived在IP层且报你服务器的IP有效，然后继续看你的TCP端口，比如说你是web server，那你的80端口就应该开启，如果keepalived发现你的80端口没有启动。那么它就会认为你已经挂掉，然后剔除。
应用层：这一层就是具体的工作程序了，keepalived是个恪尽职守的检察官，应用层的程序与用户的设定息息相关，keepalived则通过检查服务器的运行是否和用户设定一致，如果不一致，keepalived就会宣判这台服务器牺牲。

网站建设哪家好，找创新互联公司！专注于网页设计、网站建设、微信开发、微信小程序开发、集团企业网站建设等服务项目。为回馈新老客户创新互联还提供了利通免费建站欢迎大家使用！

keepalived + nginx

主机：172.25.44.3 server3
备机：172.25.44.4 server4

配置虚拟ip

[root@server3 ～]# vim /etc/sysconfig/network-scripts/ifcfg-eth0:0DEVICE=eth0:0TYPE=EthernetONBOOT=yesBOOTPROTO=staticDNS1=172.25.44.44IPADDR=172.25.44.100NETMASK=255.255.255.0GETWAY=172.25.44.44[root@server3 ～]# /etc/init.d/network restart[root@server3 ～]# ifconfigeth0 Link encap:Ethernet HWaddr 52:54:00:48:60:3E inet addr:172.25.44.4 Bcast:172.25.44.255 Mask:255.255.255.0 inet6 addr: fe80::5054:ff:fe48:603e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11926 errors:0 dropped:0 overruns:0 frame:0 TX packets:6533 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:25662550 (24.4 MiB) TX bytes:876645 (856.0 KiB) eth0:0 Link encap:Ethernet HWaddr 52:54:00:48:60:3E inet addr:172.25.44.100 Bcast:172.25.44.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:36283 errors:0 dropped:0 overruns:0 frame:0 TX packets:36283 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1982812 (1.8 MiB) TX bytes:1982812 (1.8 MiB)主备机均需配置

安装nginx

安装包：nginx-1.10.3.tar.gz
解压安装包：tar zxf nginx-1.10.3.tar.gz

[root@server3 software]# cd nginx-1.10.3 —prefix=/usr/local/lnmp/nignx [root@server3 nginx-1.10.3]# ./configure [root@server3 nginx-1.10.3]# make [root@server3 nginx-1.10.3]# make install [root@server3 nginx-1.10.3]# ln -s /usr/local/lnmp/nginx/sbin/nginx /usr/local/sbin/ #创建nginx的软链接

配置nginx

[root@server3 nginx-1.10.3]# cd /usr/local/lnmp/nginx/conf[root@server3 conf]# vim nginx.conf/#访问8088端口是的发布目录为/var/www/html，而nginx的默认发布目录还是/usr/local/lnmp/nginx/html server { listen 8088；#监听8088端口 server_name localhost; location / { root /var/www/html; index index.html index.htm; } error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/local/lnmp/nginx/html; } } [root@server3 conf]# cd /var/www/html[root@server3 html]# vim index.html Welcome to nginx!

Welcome to nginx! 172.25.44.3

[root@server3 html]# nginx

安装keepalived

安装包：keepalived-1.2.2.tar.gz

[root@server3 software]# wget http://www.keepalived.org/software/keepalived-1.2.2.tar.gz [root@server3 software]# tar zxf keepalived-1.2.2.tar.gz [root@server3 software]# cd keepalived-1.2.2 [root@server3 keepalived-1.2.2]# ./configure [root@server3 keepalived-1.2.2]# make [root@server3 keepalived-1.2.2]# make install [root@server3 keepalived-1.2.2]# cp /usr/local/sbin/keepalived /usr/sbin/ [root@server3 keepalived-1.2.2]# cp /usr/local/etc/rc.d/init.d/keepalived /etc/init.d/ [root@server3 keepalived-1.2.2]# cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/ [root@server3 keepalived-1.2.2]# cp -r /usr/local/etc/keepalived/ /etc/

配置leepalived

[root@server3 keepalived-1.2.2]# vim /var/www/html/index.html global_defs { router_id LVS_DEVEL } vrrp_script chk_http_port { script “#state MASTER:MASTER主机，BACKUP备机#priority 100:优先级指定，数字越大优先级越高#virtual_ipaddress:指定vip#track_scrip:检查端口[root@server3 keepalived-1.2.2]# /etc/init.d/keepalived start

备机次同步主机的操作步骤：keepalived的配置文件中，主机的state为MASTER，备机的state为BACKUP，备机的priority要小于主机

测试

验证nginx启动正常

访问主机nginx的默认页

访问主机nginx的指定页

访问备机nginx的默认页

访问备机nginx的指定页

访问vip

主机server3的优先级更高，在主机完好的情况下，有server3来负载nginx运行

[root@server3 software]# /etc/init.d/keepalived stop Stopping keepalived: [ OK ]当主机的keeplived服务挂掉的时候，在则访问vip，则由备机自动负载nginx运行[root@server4 conf]# ip a 1: lo: mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:48:60:3e brd ff:ff:ff:ff:ff:ff inet 172.25.44.4/24 brd 172.25.44.255 scope global eth0 inet 172.25.254.104/24 brd 172.25.254.255 scope global eth0 inet 172.25.44.100/32 scope global eth0 inet 172.25.44.100/24 brd 172.25.44.255 scope global secondary eth0:0 inet6 fe80::5054:ff:fe48:603e/64 scope link valid_lft forever preferred_lft forever同时可以看到vip浮动在备机server4上

[root@server3 software]# /etc/init.d/keepalived start Starting keepalived: [ OK ]启动主机server3上的keepalived服务，再次访问vip，则nginx的负载运行又回到主机server3上[root@server3 software]# ip a 1: lo: mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:b4:14:0d brd ff:ff:ff:ff:ff:ff inet 172.25.44.3/24 brd 172.25.44.255 scope global eth0 inet 172.25.254.103/24 brd 172.25.254.255 scope global eth0 inet 172.25.44.100/32 scope global eth0 inet6 fe80::5054:ff:feb4:140d/64 scope link valid_lft forever preferred_lft forever该情况下查看ip，发现vip浮动在主机server3上

在应用层出问题的情况下，如停掉主机server3的nginx服务，则备机server4也会自动接管nginx支持前端的访问[root@server3 software]# killall nginx

问题补充：在备机keepalived的配合配置文件中，如果补修改state的情况下实验也是可以成功的，我觉得应该时两个机子通过priority优先级竞争。

另外有需要云服务器可以了解下创新互联cdcxhl.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。

当前文章：keepalived+nginx-创新互联
本文来源：http://shouzuofang.com/article/depsoe.html

网站建设知识