oracle配置多网络接口多端口listener
环境：oracle 11.2.0.4
天峨网站制作公司哪家好，找创新互联！从网页设计、网站建设、微信开发、APP开发、响应式网站设计等网站项目制作，到程序开发，运营维护。创新互联从2013年成立到现在10年的时间，我们拥有了丰富的建站经验和运维经验，来保证我们的工作的顺利进行。专注于网站建设就选创新互联。
两个数据库实例:orcl test
主机名解析：192.168.1.30 orcl.lineqi.com orcl
[oracle@orcladmin]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:40:07:9A
inetaddr:192.168.1.30 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:fe80::20c:29ff:fe40:79a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2548 errors:0 dropped:0overruns:0 frame:0
TX packets:1875 errors:0 dropped:0overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:262084 (255.9 KiB) TX bytes:263913 (257.7 KiB)
eth2 Link encap:Ethernet HWaddr 00:0C:29:40:07:A4
inet addr:192.168.1.31 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:fe80::20c:29ff:fe40:7a4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:297 errors:0 dropped:0overruns:0 frame:0
TX packets:11 errors:0 dropped:0overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21490 (20.9 KiB) TX bytes:746 (746.0 b)
一、在两个网络接口的不同端口监听一个实例
1、配置listener
[oracle@orcl admin]$ cat listener.ora
# listener.ora Network Configuration File:/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LIST4 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.31)(PORT = 1524))
)
)
LIST3 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.30)(PORT = 1523))
)
)
LIST2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.30)(PORT = 1522))
)
)
LIST1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.30)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
)
)
2、接着配置tnsname.ora
在/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsname.ora添加如下内容。
ALL_LISTENER =
(
DESCRIPTION=
(ADDRESS_LIST =
(ADDRESS =(PROTOCOL = TCP)(HOST = 192.168.1.30)(PORT = 1521))
(ADDRESS =(PROTOCOL = TCP)(HOST = 192.168.1.30)(PORT = 1522))
(ADDRESS =(PROTOCOL = TCP)(HOST = 192.168.1.30)(PORT = 1523))
(ADDRESS =(PROTOCOL = TCP)(HOST = 192.168.1.31)(PORT = 1524))
)
(
CONNECT_DATA=
(SERVICE_NAME = orcl)
)
)
3、启动并查看各监听状态
[oracle@orcladmin]$lsnrctl start list1
[oracle@orcladmin]$lsnrctl start list2
[oracle@orcladmin]$lsnrctl start list3
[oracle@orcladmin]$lsnrctl start list4
[oracle@orcladmin]$lsnrctl status list1
[oracle@orcladmin]$lsnrctl status list2
[oracle@orcladmin]$lsnrctl status list3
[oracle@orcladmin]$lsnrctl status list4
说明：正常情况下orcl实例会被注册到list1，其余监听上没有任何服务与实例。
执行下面操作
SQL> alter system set local_listener=' ALL_LISTENER’;
SQL> alter system register;
再次查看各侦听器状态
[oracle@orcl admin]$ lsnrctl status list2
LSNRCTLfor Linux: Version 11.2.0.4.0 - Production on 17-MAY-2015 19:35:57
Copyright(c) 1991, 2013, Oracle. All rightsreserved.
Connectingto (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.30)(PORT=1522)))
STATUSof the LISTENER
------------------------
Alias list2
Version TNSLSNR for Linux: Version11.2.0.4.0 - Production
StartDate 17-MAY-2015 17:02:56
Uptime 0 days 2 hr. 33 min. 1 sec
TraceLevel off
Security ON: Local OS Authentication
SNMP OFF
ListenerParameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
ListenerLog File /u01/app/oracle/diag/tnslsnr/orcl/list2/alert/log.xml
ListeningEndpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=orcl.lineqi.com)(PORT=1522)))
Services Summary...
Service "orcl" has 1 instance(s).
Instance"orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance"orcl", status READY, has 1 handler(s) for this service...
Thecommand completed successfully
[oracle@orcl admin]$ lsnrctl status list3
LSNRCTLfor Linux: Version 11.2.0.4.0 - Production on 17-MAY-2015 19:35:55
Copyright(c) 1991, 2013, Oracle. All rightsreserved.
Connectingto (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.30)(PORT=1523)))
STATUSof the LISTENER
------------------------
Alias list3
Version TNSLSNR for Linux: Version11.2.0.4.0 - Production
StartDate 17-MAY-2015 19:16:16
Uptime 0 days 0 hr. 19 min. 38 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
ListenerParameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
ListenerLog File /u01/app/oracle/diag/tnslsnr/orcl/list3/alert/log.xml
ListeningEndpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.30)(PORT=1523)))
Services Summary...
Service "orcl" has 1 instance(s).
Instance"orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance"orcl", status READY, has 1 handler(s) for this service...
Thecommand completed successfully
[oracle@orcl admin]$ lsnrctl status list4
LSNRCTLfor Linux: Version 11.2.0.4.0 - Production on 17-MAY-2015 19:35:59
Copyright(c) 1991, 2013, Oracle. All rightsreserved.
Connectingto (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.31)(PORT=1524)))
STATUSof the LISTENER
------------------------
Alias list4
Version TNSLSNR for Linux: Version11.2.0.4.0 - Production
StartDate 17-MAY-2015 19:16:14
Uptime 0 days 0 hr. 19 min. 45 sec
TraceLevel off
Security ON: Local OS Authentication
SNMP OFF
ListenerParameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
ListenerLog File /u01/app/oracle/diag/tnslsnr/orcl/list4/alert/log.xml
ListeningEndpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.31)(PORT=1524)))
Services Summary...
Service "orcl" has 1 instance(s).
Instance"orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance"orcl", status READY, has 1 handler(s) for this service...
Thecommand completed successfully
4、通过客户端测试
C:\Users\Administrator>sqlpluslineqi/lineqi@192.168.1.30:1521/orcl
SQL*Plus:Release 11.2.0.1.0 Production on 星期日 5月 17 19:38:38 2015
Copyright(c) 1982, 2010, Oracle. All rightsreserved.
连接到:
OracleDatabase 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With thePartitioning, OLAP, Data Mining and Real Application Testing options
SQL> select instance_name from v$instance;
INSTANCE_NAME
----------------
orcl
C:\Users\Administrator>sqlpluslineqi/lineqi@192.168.1.30:1522/orcl
SQL*Plus:Release 11.2.0.1.0 Production on 星期日 5月 17 19:38:55 2015
Copyright(c) 1982, 2010, Oracle. All rightsreserved.
连接到:
OracleDatabase 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With thePartitioning, OLAP, Data Mining and Real Application Testing options
SQL> select instance_name from v$instance;
INSTANCE_NAME
----------------
orcl
C:\Users\Administrator>sqlpluslineqi/lineqi@192.168.1.30:1523/orcl
SQL*Plus:Release 11.2.0.1.0 Production on 星期日 5月 17 19:39:08 2015
Copyright(c) 1982, 2010, Oracle. All rightsreserved.
连接到:
OracleDatabase 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With thePartitioning, OLAP, Data Mining and Real Application Testing options
SQL> select instance_name from v$instance;
INSTANCE_NAME
----------------
orcl
C:\Users\Administrator>sqlpluslineqi/lineqi@192.168.1.31:1524/orcl
SQL*Plus:Release 11.2.0.1.0 Production on 星期日 5月 17 19:41:11 2015
Copyright(c) 1982, 2010, Oracle. All rightsreserved.
连接到:
OracleDatabase 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With thePartitioning, OLAP, Data Mining and Real Application Testing options
SQL> select instance_name from v$instance;
INSTANCE_NAME
----------------
orcl
上面是通过EZCONNECT方式来测试的，也可以在客户端配置来测试，在tnsname.ora添加如下内容。
orcl=
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE=ON)
(FAILOVER=ON)
(ADDRESS= (PROTOCOL = TCP)(HOST = 192.168.1.30)(PORT = 1521))
(ADDRESS= (PROTOCOL = TCP)(HOST = 192.168.1.30)(PORT = 1522))
(ADDRESS= (PROTOCOL = TCP)(HOST = 192.168.1.30)(PORT = 1523))
(ADDRESS= (PROTOCOL = TCP)(HOST = 192.168.1.31)(PORT = 1524))
)
(CONNECT_DATA =
(SERVICE_NAME = orcl)
)
)
二、在一个网接口的不同端口监听多个实例
说明：192.168.1.30:1521监听orcl实例
192.168.1.30:1522监听test实例
目前是1521这个端口监听着两个实例
[oracle@orcl admin]$ lsnrctl status list1
LSNRCTLfor Linux: Version 11.2.0.4.0 - Production on 17-MAY-2015 17:00:27
Copyright(c) 1991, 2013, Oracle. All rightsreserved.
Connectingto (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=orcl.lineqi.com)(PORT=1521)))
STATUSof the LISTENER
------------------------
Alias list1
Version TNSLSNR for Linux: Version11.2.0.4.0 - Production
StartDate 17-MAY-2015 15:45:52
Uptime 0 days 1 hr. 14 min. 35 sec
TraceLevel off
Security ON: Local OS Authentication
SNMP OFF
ListenerParameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
ListenerLog File /u01/app/oracle/diag/tnslsnr/orcl/list1/alert/log.xml
ListeningEndpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=orcl.lineqi.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
ServicesSummary...
Service "orcl" has 1 instance(s).
Instance"orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance"orcl", status READY, has 1 handler(s) for this service...
Service "test" has 1 instance(s).
Instance"test", status READY, has 1 handler(s) for this service...
Service "testXDB" has 1 instance(s).
Instance"test", status READY, has 1 handler(s) for this service...
Thecommand completed successfully
1、配置listener
这里配置list2监听即可，可以通过netca工具，也可直接编辑listener.ora文件
[oracle@orcl admin]$ cat listener.ora
#listener.ora Network Configuration File:/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
#Generated by Oracle configuration tools.
LIST2 =
(DESCRIPTION_LIST =
(DESCRIPTION=
(ADDRESS =(PROTOCOL = TCP)(HOST =orcl.lineqi.com)(PORT = 1522))
)
)
LIST1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =orcl.lineqi.com)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY =EXTPROC1521))
)
)
ADR_BASE_LIST2 = /u01/app/oracle
ADR_BASE_LIST1= /u01/app/oracle
[oracle@orcl admin]$ lsnrctl start list2
LSNRCTLfor Linux: Version 11.2.0.4.0 - Production on 17-MAY-2015 17:02:56
Copyright(c) 1991, 2013, Oracle. All rightsreserved.
Starting/u01/app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr: please wait...
TNSLSNRfor Linux: Version 11.2.0.4.0 - Production
Systemparameter file is/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Logmessages written to /u01/app/oracle/diag/tnslsnr/orcl/list2/alert/log.xml
Listeningon: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=orcl.lineqi.com)(PORT=1522)))
Connectingto (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=orcl.lineqi.com)(PORT=1522)))
STATUSof the LISTENER
------------------------
Alias list2
Version TNSLSNR for Linux: Version11.2.0.4.0 - Production
StartDate 17-MAY-2015 17:02:56
Uptime 0 days 0 hr. 0 min. 0 sec
TraceLevel off
Security ON: Local OS Authentication
SNMP OFF
ListenerParameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
ListenerLog File /u01/app/oracle/diag/tnslsnr/orcl/list2/alert/log.xml
ListeningEndpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=orcl.lineqi.com)(PORT=1522)))
Thelistener supports no services
Thecommand completed successfully
此时没有监听任何服务或实例
2、接着配置tnsname.ora
[oracle@orcl admin]$ cat tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =192.168.1.30)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = orcl)
)
)
test =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =(PROTOCOL = TCP)(HOST = 192.168.1.30)(PORT = 1522))
)
(CONNECT_DATA =
(SERVICE_NAME = test)
)
)
执行下面操作
SQL> alter system set local_listener='test';
SQL> alter system register;
接着查看list2状态发现实例已经注册成功了
[oracle@orcladmin]$ lsnrctl status list2
LSNRCTLfor Linux: Version 11.2.0.4.0 - Production on 17-MAY-2015 17:06:04
Copyright(c) 1991, 2013, Oracle. All rightsreserved.
Connectingto (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=orcl.lineqi.com)(PORT=1522)))
STATUSof the LISTENER
------------------------
Alias list2
Version TNSLSNR for Linux: Version11.2.0.4.0 - Production
StartDate 17-MAY-2015 17:02:56
Uptime 0 days 0 hr. 3 min. 7 sec
TraceLevel off
Security ON: Local OS Authentication
SNMP OFF
ListenerParameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
ListenerLog File /u01/app/oracle/diag/tnslsnr/orcl/list2/alert/log.xml
ListeningEndpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=orcl.lineqi.com)(PORT=1522)))
ServicesSummary...
Service"test" has 1 instance(s).
Instance "test", status READY, has1 handler(s) for this service...
Service"testXDB" has 1 instance(s).
Instance "test", status READY, has1 handler(s) for this service...
Thecommand completed successfully
现在查看list1发现1521这个商品只监听orcl实例
[oracle@orcladmin]$ lsnrctl status list1
LSNRCTLfor Linux: Version 11.2.0.4.0 - Production on 17-MAY-2015 17:06:47
Copyright(c) 1991, 2013, Oracle. All rightsreserved.
Connectingto (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=orcl.lineqi.com)(PORT=1521)))
STATUSof the LISTENER
------------------------
Alias list1
Version TNSLSNR for Linux: Version11.2.0.4.0 - Production
StartDate 17-MAY-2015 15:45:52
Uptime 0 days 1 hr. 20 min. 54 sec
TraceLevel off
Security ON: Local OS Authentication
SNMP OFF
ListenerParameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
ListenerLog File /u01/app/oracle/diag/tnslsnr/orcl/list1/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=orcl.lineqi.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Services Summary...
Service "orcl" has 1 instance(s).
Instance"orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance"orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
3、通过客户端测试
C:\Users\Administrator>sqlplussystem/test@192.168.1.30:1522/test
SQL*Plus:Release 11.2.0.1.0 Production on 星期日 5月 17 17:09:52 2015
Copyright(c) 1982, 2010, Oracle. All rightsreserved.
连接到:
OracleDatabase 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With thePartitioning, OLAP, Data Mining and Real Application Testing options
SQL>select instance_name from v$instance;
INSTANCE_NAME
----------------
Test
C:\Users\Administrator>sqlpluslineqi/lineqi@192.168.1.30:1521/orcl
SQL*Plus:Release 11.2.0.1.0 Production on 星期日 5月 17 17:09:34 2015
Copyright(c) 1982, 2010, Oracle. All rightsreserved.
连接到:
OracleDatabase 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With thePartitioning, OLAP, Data Mining and Real Application Testing options
SQL>select instance_name from v$instance;
INSTANCE_NAME
----------------
orcl
三、在两个网络接口上分别配置监听器监听两个实例
说明：192.168.1.30:1521监听orcl实例
192.168.1.31:1522监听test实例
实例orcl创建好list1监听后已经被监听了，这里直接配置list2监听即可。
[oracle@orcl admin]$ lsnrctl status list1
LSNRCTL for Linux: Version 11.2.0.4.0 -Production on 17-MAY-2015 16:41:25
Copyright (c) 1991, 2013, Oracle. All rights reserved.
Connecting to(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=orcl.lineqi.com)(PORT=1521)))
STATUS of the LISTENER
------------------------
Alias list1
Version TNSLSNR for Linux: Version11.2.0.4.0 - Production
Start Date 17-MAY-2015 15:45:52
Uptime 0 days 0 hr. 55 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/orcl/list1/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=orcl.lineqi.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Services Summary...
Service"orcl" has 1 instance(s).
Instance "orcl", status READY, has1 handler(s) for this service...
Service"orclXDB" has 1 instance(s).
Instance "orcl", status READY, has1 handler(s) for this service...
Thecommand completed successfully
1、配置listener
这里配置list2监听即可，可以通过netca工具，也可直接编辑listener.ora文件
[oracle@orcl admin]$ cat listener.ora
#listener.ora Network Configuration File:/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
#Generated by Oracle configuration tools.
LIST2 =
(DESCRIPTION_LIST =
(DESCRIPTION=
(ADDRESS =(PROTOCOL = TCP)(HOST = 192.168.1.31)(PORT = 1522))
)
)
LIST1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =orcl.lineqi.com)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY =EXTPROC1521))
)
)
ADR_BASE_LIST2 = /u01/app/oracle
ADR_BASE_LIST1= /u01/app/oracle
2、接着配置tnsname.ora
[oracle@orcl admin]$ cat tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =192.168.1.30)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = orcl)
)
)
test =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =(PROTOCOL = TCP)(HOST = 192.168.1.31)(PORT = 1522))
)
(CONNECT_DATA =
(SERVICE_NAME = test)
)
)
3、启动list2并查看状态
[oracle@orcl admin]$ lsnrctl startlist2
[oracle@orcl admin]$ lsnrctl status list2
LSNRCTLfor Linux: Version 11.2.0.4.0 - Production on 17-MAY-2015 16:06:55
Copyright(c) 1991, 2013, Oracle. All rightsreserved.
Connectingto (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.31)(PORT=1522)))
STATUSof the LISTENER
------------------------
Alias LIST2
Version TNSLSNR for Linux: Version11.2.0.4.0 - Production
StartDate 17-MAY-2015 15:57:56
Uptime 0 days 0 hr. 8 min. 58 sec
TraceLevel off
Security ON: Local OS Authentication
SNMP OFF
ListenerParameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
ListenerLog File /u01/app/oracle/diag/tnslsnr/orcl/list2/alert/log.xml
ListeningEndpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=orcl.lineqi.com)(PORT=1522)))
Thelistener supports no services
Thecommand completed successfully
这里发现没任何服务或实例被监听
执行下面操作
SQL>alter system set local_listener='test';
SQL>alter system register;
接着查看list2状态发现实例已经注册成功了
[oracle@orcl admin]$ lsnrctl status list2
LSNRCTLfor Linux: Version 11.2.0.4.0 - Production on 17-MAY-2015 16:08:03
Copyright(c) 1991, 2013, Oracle. All rightsreserved.
Connectingto (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.31)(PORT=1522)))
STATUSof the LISTENER
------------------------
Alias LIST2
Version TNSLSNR for Linux: Version11.2.0.4.0 - Production
StartDate 17-MAY-2015 15:57:56
Uptime 0 days 0 hr. 10 min. 7 sec
TraceLevel off
Security ON: Local OSAuthentication
SNMP OFF
ListenerParameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
ListenerLog File /u01/app/oracle/diag/tnslsnr/orcl/list2/alert/log.xml
ListeningEndpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=orcl.lineqi.com)(PORT=1522)))
ServicesSummary...
Service"test" has 1 instance(s).
Instance "test", status READY, has1 handler(s) for this service...
Service"testXDB" has 1 instance(s).
Instance "test", status READY, has1 handler(s) for this service...
Thecommand completed successfully
4、通过客户端测试
C:\Users\Administrator>sqlplussystem/test@192.168.1.31:1522/test
SQL*Plus:Release 11.2.0.1.0 Production on 星期日 5月 17 16:21:09 2015
Copyright(c) 1982, 2010, Oracle. All rightsreserved.
连接到:
OracleDatabase 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With thePartitioning, OLAP, Data Mining and Real Application Testing options
SQL>select instance_name from v$instance;
INSTANCE_NAME
----------------
test
网站栏目：oracle配置多网络接口多端口listener
网站链接：http://shouzuofang.com/article/isgjoe.html