CentOS6.4安装Nagios3.5.0-创新互联
Nagios是一款开源的免费网络监视工具，能有效监控Windows、Linux和Unix的主机状态，交换机路由器等网络设置，打印机等。在系统或服务状态异常时发出邮件或短信报警第一时间通知网站运维人员，在状态恢复后发出正常的邮件或短信通知。
一.安装环境的配置
1.关闭防火墙
为了防止因为防火墙的原因影响我们安装的环境，我们对防火墙进行关闭，如果在实际的生产环境中，我们是不建议关闭防火墙的。
[root@Nagios ~]# service iptables stop
iptables: Flushing firewall rules: [ OK ]
iptables: Setting chains to policy ACCEPT: filter [ OK ]
iptables: Unloading modules: [ OK ]
[root@Nagios ~]# chkconfig iptables off
2.关闭SELinux
如果未关闭SELinux，则可能在安装完成后，会出现Internal Server Error错误
编辑/etc/selinux/config
[root@Nagios ~]# vim /etc/selinux/config
将SELINUX=disabled
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of these two values:
# targeted - Targeted processes are protected,
# mls - Multi Level Security protection.
SELINUXTYPE=targeted
3.修改hosts文件
已知我们这台机器的主机名为Nagios,则修改/etc/hosts
127.0.0.1 Nagios localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
添加上面红色部分即可，否则启动apache服务的时候可能出现
Starting httpd: httpd: apr_sockaddr_info_get() failed for Nagios
做完以上3个步骤后，我们需要重新启动服务器。
二.软件的准备
1.安装必要的软件
[root@Nagios ~]# yum -y install wget make openssl openssl-devel httpd php gcc glibc \
> glibc-common gd gd-devel net-snmp mysql \
> mysql-server mysql-devel php-mysql perl perl-devel gnutls gnutls-devel
2.MySQL的配置（此步可省略）
虽然现在还并未使用MySQL,但是在以后的配置需要用到。
首先启动MySQL服务器
[root@Nagios ~]# service mysqld start
接着设置更改MySQL root账户的密码
[root@Nagios ~]# mysqladmin -u root password 123456
三.软件的安装
1.Nagios账户及组的添加
[root@Nagios ~]# useradd nagios
[root@Nagios ~]# groupadd nagcmd
[root@Nagios ~]# usermod -a -G nagcmd nagios
[root@Nagios ~]# usermod -a -G nagcmd apache
2.软件的下载
Nagios软件的下载
[root@Nagios ~]# wget http://prdownloads.sourceforge.net/sourceforge/nagios/nagios-3.5.0.tar.gz
[root@Nagios ~]# wget http://prdownloads.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.4.16.tar.gz
3.Nagios软件的解压
[root@Nagios ~]# tar zxvf nagios-3.5.0.tar.gz
[root@Nagios ~]# tar zxvf nagios-plugins-1.4.16.tar.gz
4.Nagios的编译与安装
首先进入Nagios解压后所在的目录
[root@Nagios ~]# cd nagios
[root@Nagios nagios]# ./configure --with-command-group=nagcmd
[root@Nagios nagios]# make all
[root@Nagios nagios]# make install
[root@Nagios nagios]# make install-init
[root@Nagios nagios]# make install-config
[root@Nagios nagios]# make install-commandmode
[root@Nagios nagios]# make install-webconf
[root@Nagios nagios]# cp -R contrib/eventhandlers/ /usr/local/nagios/libexec/
[root@Nagios nagios]# chown -R nagios:nagios /usr/local/nagios/libexec/eventhandlers/
测试nagios的配置文件
[root@Nagios nagios]# /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
如果最后出现
Total Warnings: 0
Total Errors: 0
Things look okay - No serious problems were detected during the pre-flight check
就证明nagios配置无误可正常启动！
启动Nagios服务：
[root@Nagios nagios]# service nagios start
Starting nagios: done.
启动httpd服务：
[root@Nagios nagios]# service httpd start
Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
[ OK ]
添加访问WEB服务的账户及密码
[root@Nagios nagios]# htpasswd -c /usr/local/nagios/etc/htpasswd.users admin
New password:
Re-type new password:
Adding password for user admin
这个时候就已经添加好了访问web网站的用户了
5.Nagios plugin的安装
首先进入Nagios plugin解压目录
[root@Nagios nagios]# cd ../nagios-plugins-1.4.16
进行编译：
[root@Nagios nagios-plugins-1.4.16]# ./configure --with-nagios-user=nagios --with-nagios-group=nagios --enable-extra-opts --enable-perl-modules --enable-libtap
编译成功后，会出现如下信息：
--with-apt-get-command:
--with-ping6-command: /bin/ping6 -n -U -w %d -c %d %s
--with-ping-command: /bin/ping -n -U -w %d -c %d %s
--with-ipv6: yes
--with-mysql: /usr/bin/mysql_config
--with-openssl: yes
--with-gnutls: no
--enable-extra-opts: yes
--with-perl: /usr/bin/perl
--enable-perl-modules: yes
--with-cgiurl: /nagios/cgi-bin
--with-trusted-path: /bin:/sbin:/usr/bin:/usr/sbin
--enable-libtap: yes
插件的安装
[root@Nagios nagios-plugins-1.4.16]# make
[root@Nagios nagios-plugins-1.4.16]# make install
最后将nagios及httpd加入启动项，并自动启动
[root@Nagios nagios-plugins-1.4.16]# chkconfig --add nagios
[root@Nagios nagios-plugins-1.4.16]# chkconfig --level 35 nagios on
[root@Nagios nagios-plugins-1.4.16]# chkconfig --add httpd
[root@Nagios nagios-plugins-1.4.16]# chkconfig --level 35 httpd on
另外有需要云服务器可以了解下创新互联scvps.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。
本文题目：CentOS6.4安装Nagios3.5.0-创新互联
转载源于：http://shouzuofang.com/article/shsee.html